Material characterisation

Neue Materialien Fürth GmbH

Neue Materialien Fürth GmbH's in-house laboratory is outfitted with a wide range of analytical and testing equipment for the purpose of material characterization. This includes elemental analysis equipment and two universal testing machines.

ELEMENTAL ANALYSIS EQUIPMENT

We have two machines manufactured by HORIBA Jobin Yvon for conducting elemental analysis of metal powders and solid samples. These allow us to accurately measure the nitrogen/oxygen and carbon/sulphur content of different materials. The EMGA and EMIA series machines use the carrier hot gas extraction process.

For this purpose, the samples are completely melted and the gases this produces are analysed. Various standards are available for calibrating the required measuring ranges on the machines in order to perform quantitative analysis.

ZWICK UNIVERSAL TESTING MACHINE

To ascertain materials' mechanical properties, NMF GmbH uses a Z100 static material testing machine manufactured by Zwick/Roell. Using various sample holders, test instruments and load cells (2.5 to 100 kN), we conduct tests predominantly under compressive and tensile loads. In addition, we increase the scope for bespoke component testing by developing our own instruments in house.

With a convection furnace (up to 250 °C) and a three-zone tube furnace (up to 1100 °C) at our disposal, we have everything we need for high-temperature testing. To record changes in length, NMF GmbH uses both extensometers with sensors and an optical system.

GLEEBLE UNIVERSAL TESTING MACHINE

The Gleeble 3500 testing machine manufactured by US-based company DSI is a versatile product that allows us to test a huge variety of metal materials. The hydraulic drive enables a wide range of flow velocities to be attained. Rapid heating rates can also be achieved by conductive heating of the test samples. The machine concept allows flow curves that occur during compressive and tensile testing to be recorded, for example, as well as enabling complex heat treatment to be performed and the strength of the material on solidification to be measured. Models for the development of microstructures in the test samples can then be produced using quantitative metallography.

ABOUT US

Neue Materialien Fürth GmbH (NMF) is a national research center of the Bavarian State. We transform cutting-edge materials and manufacturing methods into industrial solutions. Our 3000 m² testing field is equipped with large-scaled industrial facilities. The scope of our work is not limited to research – we also manufacture prototypes and small batches.

Neue Materialien Fürth GmbH is linked with Neue Materialien Bayreuth GmbH and the University of Erlangen (Universität Erlangen/FAU).


You will find us at Dr.-Mack-Straße 81 in 90762 Fürth,
or simply let yourself be guided by Google Maps.

 

Contact

    I agree that my data may be collected and processed electronically for the purpose of answering the request.

    Funding

    Neue Materialien Fürth GmbH is institutionally funded by:

    01_StMWi-rgb_rechts
    D___EuropFondregEntw_rechts mehere Zeilen_cmyk